访问量:9872
 
王建华
单位:热科学与能源工程系
地址:合肥市金寨路96号科大13系
邮编:230026
电话:86-551-63600945
个人主页: http://tsee.ustc.edu.cn/szdw/jsbd/201006/t20100613_21906.html
实验室介绍:
 
个人简历 Personal resume
王建华 教授 博导(德国斯图加特大学工学博士 Dr.-Ing. )

学历: 

合肥工业大学,精密机械工程系,工学学士; 
哈尔滨工业大学,动力工程系,工学硕士; 
德国斯图加特大学,能源工程系,热流体机械研究所,工学博士 

  

主要留学经历: 

92.2 - 93.8 中科院访问学者,德国宇航院哥庭根流体力学研究所,从事光学测量技术研究; 

96.6 - 96.12 资深助理研究员,香港城市大学,电子工程系,从事数值计算技术工作; 

98.4 - 03.12 全职研究员 Bat A2 ,德国斯图加特大学热流体机械研究所,从事燃气轮机高温热防护技术研究。
 
研究方向 Research direction
1、传热传质/强化冷却
2、工程热物理/流体力学
3、热流体机械/压缩空气储能
 
招生信息 Enrollment information
工程热物理知识、流体力学知识
 
论文专著 The monograph
1) Experimental investigations on overall cooling effect of ribbed channel with air bleeds - International Journal of Heat and Mass Transfer - 2012 - 55 (2012) 4800–4807
2) Numerical Investigation on Synthetical Performances of Fluid Flow and Heat Transfer of Semiattached Rib-channels - International Journal of Heat and Mass Transfer - 2011 - 54 (2011) 575–583
3) Inverse problem of transpiration cooling for estimating wall heat flux by LTNE model and CGM method - International J. of Heat and Mass Transfer - 2009 -
4) Numerical Simulation of Control Ablation by Transpiration Cooling - Heat Mass Transfer - 2007 - (2007)43:471-478
5) Model Discussion of Transpiration Cooling with Boiling - Transp. Porous Med. - 2012 - 25, April, 2012
6) An Experimental Investigation on Fluid Flow Characteristics in a Real Coolant Channel of LP Turbine Blade with PIV Technique - Journal of Experimental Thermal and Fluid Science - 2013 - (2013) 45:43-53
7) Discussion of Boundary Conditions of Transpiration Problems Using LTNE Model - ASME J. of Heat Transfer - 2008年1 - 2008,Vol.130, 014504.
8) Optimized Structure of Two Layered Porous Media with Genetic Algorithm for Transpiration Cooling - International Journal of Thermal Science - 2008 - Vol. 47
9)  Discussion of Transpiration Cooling Problems through an Analytical Solution of Local Thermal Non-Equilibrium Model - ASME J. of Heat Transfer - 2006 - Vol. 128 1093-1098
10) Synthesis and Mechanical Properties of Ternary Molybdenum Carbosilicide and Its Composite - J. of Materials Science - 2005 - 40 (2005) 2705-2707
11) A Numerical Investigation on the Laminar Boundary Flow Layer with Transpiration Cooling - Transport in Porous Media - 2008 -
12) Numerical Investigation of Transpiration and Ablation Cooling - Heat Mass Transfer - 2007 - (2007)43:274-284
13) Processing and Mechanical Behavior of Laminated Ti- Al3Ti Composites - J. of Materials Science and Eng. A - 2005 - 406(2005)309-405
14) An Experimental Investigation of Transpiration Cooling, Part I- An Application Investigation on Infrared Measurement Technique - International Journal of Rotating Machinery, - 2003 - Vol 9, No. 3. 15
15) Detecting and Characterization of Penetrating Pores of Porous Materials - Materials Characterization - 2007 - 58(2007)8-12
16) Processing and Mechanical Properties of Multiphase Composites Based on Mo- Si-Al-C System - J. of Alloys and Compounds - 2006 - 420(2006)77-82
17) An Experimental Investigation of Transpiration Cooling, Part II- Comparison of Cooling Methods and Media - International Journal of Rotating Machinery - 2004 - Vol 9, No.10. 355-363
18) Synthesis and Microstructural Characterization of Ti-Al3Ti Metal-intermetallic Laminate Composites - Scripta Materialia - 2005 - 52 (2005) 243-248
19) Microstructure and Mechanical Behavior of NixAlx-Al2O3 in Situ Composites by Pre-oxidation Followed by Hot-pressed Reactive Sintering - J. of Materials Science and Eng. A - 2006 - 425(2006) 339-345
20) Performance Investigation on Film and Tran- spiration Cooling - Proc. 45th ASME Turbo Expo 2004 ISBN: 0-7917-3739- - 2004 - 2004-GT-54132
21) A Numerical Investigation of Ablation and Transpiration Cooling Using the Local Thermal Non-equilibrium Model - Proc. of 42nd AIAA/ ASME/SAE/ASEE Joint Propulsion - 2006 - 2006-AIAA-5264
22) Experimental and Numerical Investigations on Turbine Airfoil Cooling Designs, Part I- An Investigation on Flow Features by Particle Image Velocimetry - Proc. of 49th ASME Turbo Expo 2008 - 2008年6 - GT2008-50673
23) 发散冷却最小冷却介质注射量的数值方法研究 - 航空动力学报 - 2007 - Vol. 22, No.1
24) Experimental and Numerical Investigations on Turbine Airfoil Cooling Designs, Part II-An Investigation on Heat Transfer Features by Infrared Thermal Imaging Technique - Proc. of ASME Turbo Expo 2008 - 2008年6 - GT2008-50674
25) Inverse problem of estimating space and time dependent hot surface heat fluxin transient transpiration cooling process - International J. of Thermal Sciences - 2009 -
26)  Inverse problem of estimating space and time dependent hot surface heat flux in transient transpiration cooling process - International J. of Thermal Sciences - 2009 - 48
27) A Numerical Investigation on Fluid-Thermal-Structure Coupling Characteristics of Laminated Film Cooling Configuration - ASME Turbo Expo, GT-2009-59604 - 2009 -
28) AN EXPERIMENTAL INVESTIGATION ON COOLING PERFORMANCE OF A LAMINATED CONFIGURATION USING INFRARED THERMAL IMAGE TECHNIQUE - ASME Turbo Expo GT-2009-59838 - 2009 -
29) A Numerical Investigation of Transpiration Cooling with Coolant Phase Change - ASME J. of Heat Transfer - 2009 - 131
 
报考意向 Ambition
 
 
COPYRIGHT 2007 中国科学技术大学研究生院、校学位办 All Rights Reserved 地址:安徽省合肥市金寨路96号 邮编:230026。
TEL:+86-551-63602928 FAX:+86-551-63602179 E-mail:gradschl@ustc.edu.cn