Faculty Profile
 
  WANG Jianhua
     
Department: Department of Thermal Science & Energy Engineering
Mailing Address:
Department of Thermal Science & Energy Engineering, University of Science and Technology of China, 443 Huangshan Rd, Hefei, Anhui, PR China
Postal Code:
230026
Phone:
86-551-63600945
Fax:
Homepage:
http://tsee.ustc.edu.cn/szdw/jsbd/201006/t20100613_21906.html
 
       

Research Profile

    Wang Jianhua, professor, Ph.D. supervisor
Education: 
Bachelor’s degree, Dept. of Precision Machinery Engineering, Hefei University of Technology;
Master’s degree, Dept. of Power Engineering, Harbin Institute of Technology;
Ph.D., Institute of Thermal Fluid Machinery, Faculty of Energy Technology, University of Stuttgart, Germany;
Feb.1992-Aug.1993, CAS visiting scholar, Goettingen Institute of Fluid Mechanics,  German Aerospace Centre, doing research on optical measurement techniques;
Jun.1996-Dec.1996, senior research assistant, Dept. of Electronic Engineering, City University of Hong Kong, doing research on Numerical Computing;
Apr.1998-Dec.2003, fulltime research fellow, Institute of Thermal Fluid Machinery, University of Stuttgart, Germany, doing research on Gas Turbine High Temperature Protection
 
     
Selected Publications
1) Experimental investigations on overall cooling effect of ribbed channel with air bleeds , International Journal of Heat and Mass Transfer , 2012 , 55 (2012) 4800–4807
2) Numerical Investigation on Synthetical Performances of Fluid Flow and Heat Transfer of Semiattached Rib-channels , International Journal of Heat and Mass Transfer , 2011 , 54 (2011) 575–583
3) Inverse problem of transpiration cooling for estimating wall heat flux by LTNE model and CGM method , International J. of Heat and Mass Transfer , 2009 ,
4) Model Discussion of Transpiration Cooling with Boiling , Transp. Porous Med. , 2012 , 25, April, 2012
5) Numerical Simulation of Control Ablation by Transpiration Cooling , Heat Mass Transfer , 2007 , (2007)43:471-478
6) An Experimental Investigation on Fluid Flow Characteristics in a Real Coolant Channel of LP Turbine Blade with PIV Technique , Journal of Experimental Thermal and Fluid Science , 2013 , (2013) 45:43-53
7) Discussion of Boundary Conditions of Transpiration Problems Using LTNE Model , ASME J. of Heat Transfer , 2008年1 , 2008,Vol.130, 014504.
8) Optimized Structure of Two Layered Porous Media with Genetic Algorithm for Transpiration Cooling , International Journal of Thermal Science , 2008 , Vol. 47
9) A Numerical Investigation on the Laminar Boundary Flow Layer with Transpiration Cooling , Transport in Porous Media , 2008 ,
10)  Discussion of Transpiration Cooling Problems through an Analytical Solution of Local Thermal Non-Equilibrium Model , ASME J. of Heat Transfer , 2006 , Vol. 128 1093-1098
11) Synthesis and Mechanical Properties of Ternary Molybdenum Carbosilicide and Its Composite , J. of Materials Science , 2005 , 40 (2005) 2705-2707
12) Numerical Investigation of Transpiration and Ablation Cooling , Heat Mass Transfer , 2007 , (2007)43:274-284
13) Processing and Mechanical Behavior of Laminated Ti- Al3Ti Composites , J. of Materials Science and Eng. A , 2005 , 406(2005)309-405
14) An Experimental Investigation of Transpiration Cooling, Part I- An Application Investigation on Infrared Measurement Technique , International Journal of Rotating Machinery, , 2003 , Vol 9, No. 3. 15
15) Detecting and Characterization of Penetrating Pores of Porous Materials , Materials Characterization , 2007 , 58(2007)8-12
16) Processing and Mechanical Properties of Multiphase Composites Based on Mo- Si-Al-C System , J. of Alloys and Compounds , 2006 , 420(2006)77-82
17) An Experimental Investigation of Transpiration Cooling, Part II- Comparison of Cooling Methods and Media , International Journal of Rotating Machinery , 2004 , Vol 9, No.10. 355-363
18) Synthesis and Microstructural Characterization of Ti-Al3Ti Metal-intermetallic Laminate Composites , Scripta Materialia , 2005 , 52 (2005) 243-248
19) Microstructure and Mechanical Behavior of NixAlx-Al2O3 in Situ Composites by Pre-oxidation Followed by Hot-pressed Reactive Sintering , J. of Materials Science and Eng. A , 2006 , 425(2006) 339-345
20) Performance Investigation on Film and Tran- spiration Cooling , Proc. 45th ASME Turbo Expo 2004 ISBN: 0-7917-3739- , 2004 , 2004-GT-54132
21) A Numerical Investigation of Ablation and Transpiration Cooling Using the Local Thermal Non-equilibrium Model , Proc. of 42nd AIAA/ ASME/SAE/ASEE Joint Propulsion , 2006 , 2006-AIAA-5264
22) Experimental and Numerical Investigations on Turbine Airfoil Cooling Designs, Part I- An Investigation on Flow Features by Particle Image Velocimetry , Proc. of 49th ASME Turbo Expo 2008 , 2008年6 , GT2008-50673
23) Experimental and Numerical Investigations on Turbine Airfoil Cooling Designs, Part II-An Investigation on Heat Transfer Features by Infrared Thermal Imaging Technique , Proc. of ASME Turbo Expo 2008 , 2008年6 , GT2008-50674
24) 发散冷却最小冷却介质注射量的数值方法研究 , 航空动力学报 , 2007 , Vol. 22, No.1
25) Inverse problem of estimating space and time dependent hot surface heat fluxin transient transpiration cooling process , International J. of Thermal Sciences , 2009 ,
26)  Inverse problem of estimating space and time dependent hot surface heat flux in transient transpiration cooling process , International J. of Thermal Sciences , 2009 , 48
27) A Numerical Investigation on Fluid-Thermal-Structure Coupling Characteristics of Laminated Film Cooling Configuration , ASME Turbo Expo, GT-2009-59604 , 2009 ,
28) AN EXPERIMENTAL INVESTIGATION ON COOLING PERFORMANCE OF A LAMINATED CONFIGURATION USING INFRARED THERMAL IMAGE TECHNIQUE , ASME Turbo Expo GT-2009-59838 , 2009 ,
29) A Numerical Investigation of Transpiration Cooling with Coolant Phase Change , ASME J. of Heat Transfer , 2009 , 131
 
Recruitment information